|
BS5-F1M-P

Share:


BS5-F1M-P

Contact Us


Quantity:


Specifications

Sensing Type: Through-beam type

Sensing Distance: 5mm

Sensing Target: Opaque

Light Source: Infrared LED

Response Time: Light ON: Max. 20,
Dark ON: Max. 100

Power Supply: 5-24VDC ±10%(ripple P-P : max. 10%)

Current Consumption: Max. 30mA

Operation Mode: Light ON/Dark ON (set by control wire)

Control Output: PNP open collector

Connection Type: 3 mm, 4-wire, 1m

Environment_Ambient Illumination: Fluorescent lamp: Max. 1,000lx(received illumination)

Environment_Ambient Temperature: -20 to 55℃, storage : -25 to 85℃

Protection Structure: IP50 (IEC standard)

Environment_Ambient Humidity: 35 to 85% RH, storage: 35 to 85% RH

Weight: Approx. 50g

Hysteresis (Distance): ≤0.05mm

Min. Sensing Target: ≥0.8mm×2mm

Response frequency: 2kHz

Peak Emission Wavelength: 940nm

Indicator: Operation indicator (red LED)

Load Voltage: ≤30VDC

Load Current: Max. 100mA

Residual voltage: NPN: ≤1.2VDC, PNP: ≤ 1.2VDC

Protection Circuit: Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit

Insulation Resistance: ≥20 MΩ (250 VDC megger)

Noise Immunity: The square wave noise (pulse width: 1) by the noise simulator ±240VDC

Dielectric Strength: 1,000VAC 50/60Hz for 1 minute

Vibration: 1.5mm amplitude (max. acceleration 196m/s) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours

Shock: 15,000 m/s (approx. 1,500G) in each X, Y, Z direction for 3 times

Connection: Cable type

Core: AWG28 (0.08mm)

Material: Case: PBT, Sensing part: PC


Approval :


 Inquiry - BS5-F1M-P