|

Comparison between BS5-F1M, BRQPS700-DDTA-C

Selected Product
BS5-F1M

BS5-F1M

BRQPS700-DDTA-C

BRQPS700-DDTA-C

Name

BS5-F1M

BRQPS700-DDTA-C

Category

Sensing Type

Through-beam type

Diffuse reflective type

Sensing Distance

5mm

700mm

Sensing Target

Opaque

Opaque, Translucent material

Light Source

Infrared LED

Red LED (660nm)

Response Time

Light ON: Max. 20,
Dark ON: Max. 100

Max. 1ms

Power Supply

5-24VDC ±10%(ripple P-P : max. 10%)

10-30VDC ±10% (ripple P-P: max. 10%)

Current Consumption

Max. 30mA

Max. 30mA

Sensitivity Adjustment

Sensitivity Adjuster

Operation Mode

Light ON/Dark ON (set by control wire)

Light ON/Dark ON (set by control wire)

Control Output

NPN open collector

NPN Open Collector

Connection Type

3 mm, 4-wire, 1m

Connector type(M12)

Environment_Ambient Illumination

Fluorescent lamp: Max. 1,000lx(received illumination)

Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)

Environment_Ambient Temperature

-20 to 55℃, storage : -25 to 85℃

-25 to 60℃, storage: -30 to 70℃

Protection Structure

IP50 (IEC standard)

IP67

Environment_Ambient Humidity

35 to 85% RH, storage: 35 to 85% RH

35 to 85% RH, storage: 35 to 85% RH

Accessories Common

M18 fixing nut: 2, adjustment screwdriver

Weight

Approx. 50g

Approx. 120g(approx. 25g)

Hysteresis (Distance)

≤0.05mm

Max. 20% at rated sensing distance

Min. Sensing Target

≥0.8mm×2mm

Response frequency

2kHz

Peak Emission Wavelength

940nm

Indicator

Operation indicator (red LED)

Load Voltage

≤30VDC

Load Current

Max. 100mA

Residual voltage

NPN: ≤1.2VDC, PNP: ≤ 1.2VDC

Protection Circuit

Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit

Insulation Resistance

≥20 MΩ (250 VDC megger)

Noise Immunity

The square wave noise (pulse width: 1) by the noise simulator ±240VDC

Dielectric Strength

1,000VAC 50/60Hz for 1 minute

Vibration

1.5mm amplitude (max. acceleration 196m/s) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours

Shock

15,000 m/s (approx. 1,500G) in each X, Y, Z direction for 3 times

Connection

Cable type

Core

AWG28 (0.08mm)

Material

Case: PBT, Sensing part: PC