Comparison between BRQPS700-DDTA-C-P, KT-502H1, PSAN-D1CPV-Rc1/8
Name
BRQPS700-DDTA-C-P
KT-502H1
PSAN-D1CPV-Rc1/8
Category
Sensing Type
Diffuse reflective type
Sensing Distance
700mm
Sensing Target
Opaque, Translucent material
Light Source
Red LED (660nm)
Response Time
Max. 1ms
1 sec
Power Supply
10-30VDC ±10% (ripple P-P: max. 10%)
10.5-45VDC (with backlight LCD)
12-24VDC ±10%(ripple P-P: max. 10%)
Current Consumption
Max. 30mA
Voltage output type: Max. 50mA
Current output type: Max. 75mA
Sensitivity Adjustment
Sensitivity Adjuster
Operation Mode
Light ON/Dark ON (set by control wire)
Control Output
PNP Open Collector
Connection Type
Connector type(M12)
Connector type (connector type cable: 2m)
Environment_Ambient Illumination
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient Temperature
-25 to 60℃, storage: -30 to 70℃
-20 to 70 C, storage: 20 to 80 C
-10 to 50℃, storage: -20 to 60℃
Protection Structure
IP67
IP40
Environment_Ambient Humidity
35 to 85% RH, storage: 35 to 85% RH
0 to 85%RH, storage: 0 to 85%RH
30 to 80% RH, storage: 30 to 80% RH
Accessories Common
M18 fixing nut: 2, adjustment screwdriver
Weight
Approx. 120g(approx. 25g)
Approx. 1.4kg(approx. 1.2kg)
Approx. 170g (approx. 85g)
Hysteresis (Distance)
Max. 20% at rated sensing distance
Material
Body: Aluminum (AlDc.8S), Cover O-Ring: Buna N
Front case: Polycarbonate Rear case: Polybutylene Terephthalate + Glass Fiber 15%, Pressure port: Nickel Plated Brass
Display Method
PV display part: 7-segment 5-digit (character size: W4×H8mm), Parameter display part: 14-segment 8-digit (character size: W2.6×H4.8mm), 52-bar meter
Display Range
-19999 to 99999
Setting Type
HART-protocol (no setting key)
Input Type_RTD
DPt100Ω, DPt500Ω, DPt1000Ω, Ni100Ω, Ni500Ω, Ni1000Ω, Cu50Ω, Cu100Ω
Input Type_TC
K, J, T, E, N, S, B, R
Input Type_Voltage Transmission
-10-75mV, -100-100mV, -100-500mV, -100-2000mV
Output
DC4-20mA (2-wire)
Alarm
Below 3.8mA, Over 20.5mA/Sensor break 3.6mA
Load
Max.(V power supply - 7.5V)/0.22A
Galvanic Insulation
2kVAC (input/output)
Explosion Class
Ex d IIC T6
Applicable Fluid
(Pneumatic type) Air, Non-corrosive gas
Pressure Port Direction
Bottom fitting
Pressure Port
Rc1/8
Pressure Type
Standard pressure
Rated Pressure Range
0 to 1,000kPa
Display Pressure Unit
MPa, kPa, kgf/cm, bar, psi
Option Input/Output
Voltage(1-5VDC ) output
Control Output_Hysteresis
Min. display interval
Control Output_Repeat Error
±0.2% F.S. ±Min. display interval
Control Output_Response Time
Selectable 2.5ms, 5ms, 100ms, 500ms, 1000ms
Control Output_PNP Open Collector
PNP open collector
Selected Product