Comparison between BRQPS700-DDTA-C-P, BS5-F1M, BRQPS700-DDTA-C
Name
BRQPS700-DDTA-C-P
BS5-F1M
BRQPS700-DDTA-C
Category
Sensing Type
Diffuse reflective type
Through-beam type
Diffuse reflective type
Sensing Distance
700mm
5mm
700mm
Sensing Target
Opaque, Translucent material
Opaque
Opaque, Translucent material
Light Source
Red LED (660nm)
Infrared LED
Red LED (660nm)
Response Time
Max. 1ms
Light ON: Max. 20,
Dark ON: Max. 100
Max. 1ms
Power Supply
10-30VDC ±10% (ripple P-P: max. 10%)
5-24VDC ±10%(ripple P-P : max. 10%)
10-30VDC ±10% (ripple P-P: max. 10%)
Current Consumption
Max. 30mA
Max. 30mA
Max. 30mA
Sensitivity Adjustment
Sensitivity Adjuster
Sensitivity Adjuster
Operation Mode
Light ON/Dark ON (set by control wire)
Light ON/Dark ON (set by control wire)
Light ON/Dark ON (set by control wire)
Control Output
PNP Open Collector
NPN open collector
NPN Open Collector
Connection Type
Connector type(M12)
3 mm, 4-wire, 1m
Connector type(M12)
Environment_Ambient Illumination
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Fluorescent lamp: Max. 1,000lx(received illumination)
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient Temperature
-25 to 60℃, storage: -30 to 70℃
-20 to 55℃, storage : -25 to 85℃
-25 to 60℃, storage: -30 to 70℃
Protection Structure
IP67
IP50 (IEC standard)
IP67
Environment_Ambient Humidity
35 to 85% RH, storage: 35 to 85% RH
35 to 85% RH, storage: 35 to 85% RH
35 to 85% RH, storage: 35 to 85% RH
Accessories Common
M18 fixing nut: 2, adjustment screwdriver
M18 fixing nut: 2, adjustment screwdriver
Weight
Approx. 120g(approx. 25g)
Approx. 50g
Approx. 120g(approx. 25g)
Hysteresis (Distance)
Max. 20% at rated sensing distance
≤0.05mm
Max. 20% at rated sensing distance
Min. Sensing Target
≥0.8mm×2mm
Response frequency
2kHz
Peak Emission Wavelength
940nm
Indicator
Operation indicator (red LED)
Load Voltage
≤30VDC
Load Current
Max. 100mA
Residual voltage
NPN: ≤1.2VDC, PNP: ≤ 1.2VDC
Protection Circuit
Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
Insulation Resistance
≥20 MΩ (250 VDC megger)
Noise Immunity
The square wave noise (pulse width: 1) by the noise simulator ±240VDC
Dielectric Strength
1,000VAC 50/60Hz for 1 minute
Vibration
1.5mm amplitude (max. acceleration 196m/s) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours
Shock
15,000 m/s (approx. 1,500G) in each X, Y, Z direction for 3 times
Connection
Cable type
Core
AWG28 (0.08mm)
Material
Case: PBT, Sensing part: PC
Selected Product