|

Comparison between BJX10M-TDT-C, PSQ-C01CU-RC1/8

Selected Product
BJX10M-TDT-C

BJX10M-TDT-C

PSQ-C01CU-RC1/8

PSQ-C01CU-RC1/8

Name

BJX10M-TDT-C

PSQ-C01CU-RC1/8

Category

Sensing Type

Through-beam type

Sensing Distance

10m

Sensing Target

Opaque material of min. 15mm

Light Source

Red LED (660nm)

Response Time

Max. 1ms

Power Supply

10-30VDC ±10% (ripple P-P: max. 10%)

12-24VDC ±10%(ripple P-P: max. 10%)

Current Consumption

Emitter/Receiver: Max. 20mA

Max. 50mA (current output: Max. 70mA)

Sensitivity Adjustment

Sensitivity Adjuster

Operation Mode

Light ON/Dark ON (set by switch)

Control Output

NPN Open Collector

Select one at parameter setting,
NPN open collector output,
PNP open collector output

Connection Type

4mm, 3-wire, 2m (emitter of through-beam type: 4mm, 2-wire, 2m)
(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: 1mm)

Connector type (connector type cable: 2m)

Environment_Ambient Illumination

Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)

Environment_Ambient Temperature

-25 to 60℃, storage: -40 to 70℃

-10 to 50℃, storage: -20 to 60℃

Protection Structure

IP65 (IEC standard)

IP40

Environment_Ambient Humidity

35 to 85% RH, storage: 35 to 85% RH

30 to 80% RH, storage: 30 to 80% RH

Accessories Common

Mounting bracket, M3 bolt: 4, adjustment screwdriver

Weight

Approx. 65g (approx. 12g)

Approx. 165g (approx. 80g)

Material

Front case: polycarbonate, Rear case: Polybutylene terephthalate + glass 15%, Pressure port: stainless steel 303

Applicable Fluid

(Pneumatic type) Air, Non-corrosive gas

Pressure Port Direction

Rear fitting

Pressure Port

Rc1/8

Pressure Type

Compound pressure

Rated Pressure Range

-100.0 to 100.0kPa

Display Pressure Unit

MPa, kPa, kgf/cm, bar, psi, mmHg, inHg, mmHO

Option Input/Output

Select one at parameter setting
Voltage(1-5VDC ) output
Current(DC4-20mA) output
AUTO SHIFT, REMOTE ZERO, HOLD input

Control Output_Hysteresis

Min. display interval

Control Output_Repeat Error

±0.2% F.S. ±Min. display interval

Control Output_Response Time

Select one: 2.5ms, 5ms, 10ms, 25ms, 50ms, 100ms, 250ms, 500ms, 1,000ms, 5,000ms