Comparison between BJX10M-TDT-C, KT-502H1
Name
BJX10M-TDT-C
KT-502H1
Category
Sensing Type
Through-beam type
Sensing Distance
10m
Sensing Target
Opaque material of min. 15mm
Light Source
Red LED (660nm)
Response Time
Max. 1ms
1 sec
Power Supply
10-30VDC ±10% (ripple P-P: max. 10%)
10.5-45VDC (with backlight LCD)
Current Consumption
Emitter/Receiver: Max. 20mA
Sensitivity Adjustment
Sensitivity Adjuster
Operation Mode
Light ON/Dark ON (set by switch)
Control Output
NPN Open Collector
Connection Type
4mm, 3-wire, 2m (emitter of through-beam type: 4mm, 2-wire, 2m)
(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: 1mm)
Environment_Ambient Illumination
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient Temperature
-25 to 60℃, storage: -40 to 70℃
-20 to 70 C, storage: 20 to 80 C
Protection Structure
IP65 (IEC standard)
Environment_Ambient Humidity
35 to 85% RH, storage: 35 to 85% RH
0 to 85%RH, storage: 0 to 85%RH
Accessories Common
Mounting bracket, M3 bolt: 4, adjustment screwdriver
Weight
Approx. 65g (approx. 12g)
Approx. 1.4kg(approx. 1.2kg)
Material
Body: Aluminum (AlDc.8S), Cover O-Ring: Buna N
Display Method
PV display part: 7-segment 5-digit (character size: W4×H8mm), Parameter display part: 14-segment 8-digit (character size: W2.6×H4.8mm), 52-bar meter
Display Range
-19999 to 99999
Setting Type
HART-protocol (no setting key)
Input Type_RTD
DPt100Ω, DPt500Ω, DPt1000Ω, Ni100Ω, Ni500Ω, Ni1000Ω, Cu50Ω, Cu100Ω
Input Type_TC
K, J, T, E, N, S, B, R
Input Type_Voltage Transmission
-10-75mV, -100-100mV, -100-500mV, -100-2000mV
Output
DC4-20mA (2-wire)
Alarm
Below 3.8mA, Over 20.5mA/Sensor break 3.6mA
Load
Max.(V power supply - 7.5V)/0.22A
Galvanic Insulation
2kVAC (input/output)
Explosion Class
Ex d IIC T6
Selected Product