Comparison between BJX10M-TDT-C, BS5-F1M-P
Name
BJX10M-TDT-C
BS5-F1M-P
Category
Sensing Type
Through-beam type
Through-beam type
Sensing Distance
10m
5mm
Sensing Target
Opaque material of min. 15mm
Opaque
Light Source
Red LED (660nm)
Infrared LED
Response Time
Max. 1ms
Light ON: Max. 20,
Dark ON: Max. 100
Power Supply
10-30VDC ±10% (ripple P-P: max. 10%)
5-24VDC ±10%(ripple P-P : max. 10%)
Current Consumption
Emitter/Receiver: Max. 20mA
Max. 30mA
Sensitivity Adjustment
Sensitivity Adjuster
Operation Mode
Light ON/Dark ON (set by switch)
Light ON/Dark ON (set by control wire)
Control Output
NPN Open Collector
PNP open collector
Connection Type
4mm, 3-wire, 2m (emitter of through-beam type: 4mm, 2-wire, 2m)
(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: 1mm)
3 mm, 4-wire, 1m
Environment_Ambient Illumination
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Fluorescent lamp: Max. 1,000lx(received illumination)
Environment_Ambient Temperature
-25 to 60℃, storage: -40 to 70℃
-20 to 55℃, storage : -25 to 85℃
Protection Structure
IP65 (IEC standard)
IP50 (IEC standard)
Environment_Ambient Humidity
35 to 85% RH, storage: 35 to 85% RH
35 to 85% RH, storage: 35 to 85% RH
Accessories Common
Mounting bracket, M3 bolt: 4, adjustment screwdriver
Weight
Approx. 65g (approx. 12g)
Approx. 50g
Hysteresis (Distance)
≤0.05mm
Min. Sensing Target
≥0.8mm×2mm
Response frequency
2kHz
Peak Emission Wavelength
940nm
Indicator
Operation indicator (red LED)
Load Voltage
≤30VDC
Load Current
Max. 100mA
Residual voltage
NPN: ≤1.2VDC, PNP: ≤ 1.2VDC
Protection Circuit
Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
Insulation Resistance
≥20 MΩ (250 VDC megger)
Noise Immunity
The square wave noise (pulse width: 1) by the noise simulator ±240VDC
Dielectric Strength
1,000VAC 50/60Hz for 1 minute
Vibration
1.5mm amplitude (max. acceleration 196m/s) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours
Shock
15,000 m/s (approx. 1,500G) in each X, Y, Z direction for 3 times
Connection
Cable type
Core
AWG28 (0.08mm)
Material
Case: PBT, Sensing part: PC
Selected Product