Comparison between BJX10M-TDT-C, BRQPS700-DDTA-C-P, PSQ-C01CU-RC1/8
Name
BJX10M-TDT-C
BRQPS700-DDTA-C-P
PSQ-C01CU-RC1/8
Category
Sensing Type
Through-beam type
Diffuse reflective type
Sensing Distance
10m
700mm
Sensing Target
Opaque material of min. 15mm
Opaque, Translucent material
Light Source
Red LED (660nm)
Red LED (660nm)
Response Time
Max. 1ms
Max. 1ms
Power Supply
10-30VDC ±10% (ripple P-P: max. 10%)
10-30VDC ±10% (ripple P-P: max. 10%)
12-24VDC ±10%(ripple P-P: max. 10%)
Current Consumption
Emitter/Receiver: Max. 20mA
Max. 30mA
Max. 50mA (current output: Max. 70mA)
Sensitivity Adjustment
Sensitivity Adjuster
Sensitivity Adjuster
Operation Mode
Light ON/Dark ON (set by switch)
Light ON/Dark ON (set by control wire)
Control Output
NPN Open Collector
PNP Open Collector
Select one at parameter setting,
NPN open collector output,
PNP open collector output
Connection Type
4mm, 3-wire, 2m (emitter of through-beam type: 4mm, 2-wire, 2m)
(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: 1mm)
Connector type(M12)
Connector type (connector type cable: 2m)
Environment_Ambient Illumination
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient Temperature
-25 to 60℃, storage: -40 to 70℃
-25 to 60℃, storage: -30 to 70℃
-10 to 50℃, storage: -20 to 60℃
Protection Structure
IP65 (IEC standard)
IP67
IP40
Environment_Ambient Humidity
35 to 85% RH, storage: 35 to 85% RH
35 to 85% RH, storage: 35 to 85% RH
30 to 80% RH, storage: 30 to 80% RH
Accessories Common
Mounting bracket, M3 bolt: 4, adjustment screwdriver
M18 fixing nut: 2, adjustment screwdriver
Weight
Approx. 65g (approx. 12g)
Approx. 120g(approx. 25g)
Approx. 165g (approx. 80g)
Hysteresis (Distance)
Max. 20% at rated sensing distance
Material
Front case: polycarbonate, Rear case: Polybutylene terephthalate + glass 15%, Pressure port: stainless steel 303
Applicable Fluid
(Pneumatic type) Air, Non-corrosive gas
Pressure Port Direction
Rear fitting
Pressure Port
Rc1/8
Pressure Type
Compound pressure
Rated Pressure Range
-100.0 to 100.0kPa
Display Pressure Unit
MPa, kPa, kgf/cm, bar, psi, mmHg, inHg, mmHO
Option Input/Output
Select one at parameter setting
Voltage(1-5VDC ) output
Current(DC4-20mA) output
AUTO SHIFT, REMOTE ZERO, HOLD input
Control Output_Hysteresis
Min. display interval
Control Output_Repeat Error
±0.2% F.S. ±Min. display interval
Control Output_Response Time
Select one: 2.5ms, 5ms, 10ms, 25ms, 50ms, 100ms, 250ms, 500ms, 1,000ms, 5,000ms
Selected Product