Comparison between BJX10M-TDT-C, BRQPS700-DDTA-C-P, KT-502H1
Name
BJX10M-TDT-C
BRQPS700-DDTA-C-P
KT-502H1
Category
Sensing Type
Through-beam type
Diffuse reflective type
Sensing Distance
10m
700mm
Sensing Target
Opaque material of min. 15mm
Opaque, Translucent material
Light Source
Red LED (660nm)
Red LED (660nm)
Response Time
Max. 1ms
Max. 1ms
1 sec
Power Supply
10-30VDC ±10% (ripple P-P: max. 10%)
10-30VDC ±10% (ripple P-P: max. 10%)
10.5-45VDC (with backlight LCD)
Current Consumption
Emitter/Receiver: Max. 20mA
Max. 30mA
Sensitivity Adjustment
Sensitivity Adjuster
Sensitivity Adjuster
Operation Mode
Light ON/Dark ON (set by switch)
Light ON/Dark ON (set by control wire)
Control Output
NPN Open Collector
PNP Open Collector
Connection Type
4mm, 3-wire, 2m (emitter of through-beam type: 4mm, 2-wire, 2m)
(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: 1mm)
Connector type(M12)
Environment_Ambient Illumination
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient Temperature
-25 to 60℃, storage: -40 to 70℃
-25 to 60℃, storage: -30 to 70℃
-20 to 70 C, storage: 20 to 80 C
Protection Structure
IP65 (IEC standard)
IP67
Environment_Ambient Humidity
35 to 85% RH, storage: 35 to 85% RH
35 to 85% RH, storage: 35 to 85% RH
0 to 85%RH, storage: 0 to 85%RH
Accessories Common
Mounting bracket, M3 bolt: 4, adjustment screwdriver
M18 fixing nut: 2, adjustment screwdriver
Weight
Approx. 65g (approx. 12g)
Approx. 120g(approx. 25g)
Approx. 1.4kg(approx. 1.2kg)
Hysteresis (Distance)
Max. 20% at rated sensing distance
Material
Body: Aluminum (AlDc.8S), Cover O-Ring: Buna N
Display Method
PV display part: 7-segment 5-digit (character size: W4×H8mm), Parameter display part: 14-segment 8-digit (character size: W2.6×H4.8mm), 52-bar meter
Display Range
-19999 to 99999
Setting Type
HART-protocol (no setting key)
Input Type_RTD
DPt100Ω, DPt500Ω, DPt1000Ω, Ni100Ω, Ni500Ω, Ni1000Ω, Cu50Ω, Cu100Ω
Input Type_TC
K, J, T, E, N, S, B, R
Input Type_Voltage Transmission
-10-75mV, -100-100mV, -100-500mV, -100-2000mV
Output
DC4-20mA (2-wire)
Alarm
Below 3.8mA, Over 20.5mA/Sensor break 3.6mA
Load
Max.(V power supply - 7.5V)/0.22A
Galvanic Insulation
2kVAC (input/output)
Explosion Class
Ex d IIC T6
Selected Product